Daewoo IC Forklifts
Inspect a Forklift
There are more than 10,000 workplace injuries connected to forklifts occur each year, according to HRSDC and OSHA reports. Many of these mishaps are caused by operator error. Lack of appropriate equipment maintenance and inspection results in numerous others. Operation and maintenance of a forklift is not only the reason for personal injuries, but also of damage to property. Forklifts can damage building structures, overhead pipes and sprinklers, and other machines when operated incorrectly. The following day by day inspections should be carried out so as to lessen the likelihood of forklift accidents.
Turn off the engine prior to checking different fluid levels: engine oil, fuel, coolant, brake fluid and hydraulic oil. The tires must be inspected for signs of wear and tear. Check the tire air pressure. Check the forks' condition. The load backrest must be attached firmly. Do a visual check of the top-clip retaining pin and heel. After that perform an inspection of the mast chains, hydraulic hoses, cables and stops. Make sure that both the finger and overhead guards are attached securely.
LP forklifts have propane tanks that have to be checked for indications of damage, rust or corrosion. Test the battery's electrolyte levels and charge. All belts must be inspected for wear. Check to make sure the owner's guidebook is stored on-board the forklift in a storage compartment. Check the seat belt to make sure the latches are secure. Test the hood latch to make certain that it is working as it should.
To make certain there are no unusual engine sounds, start the engine up and listen for any irregularities. If there are, investigate at once. Check the steering controls and the accelerator. The service brake and the parking break should be functioning properly.
To guarantee proper functioning in both forward and reverse, the tilt control and drive control should be checked. The functioning of the hoist, the lowering control and attachment control requires periodic inspection. Check the lights and horn. Afterward check the defroster, wipers and heater to make sure they are functioning smoothly. Inspect each gauge to find out that it is reading within functional limits.
- Hyster Outdoor Forklift
Unisource - For over 90 brands of material handling machinery in addition to more than 4.8 million replacement parts and accessories, ... More
- Mitsubishi Big Forklifts
Lift truck operators are normally on the trucks more than 7 out of 8 hours per day in several forklift corporations. Operators will be ... More
- Potain Construction Cranes
Potain is a world leader in the industry of construction cranes. This is a specific kind which belongs to Manitowoc. They specify in ... More
- Nissan Stand Up Forklift
It is totally different to use a stand-up lift truck compared to a sit-down unit. The way you transport and lift cargo along with your ... More
- Snorkel Boom Lifts
Back during the year 1946, Wally Johnson began to create the markets for the scaffold towers and aerial work platforms all by himself. ... More